Model 500

Semi-automatic turntable stretch wrapper or pallet wrapper with cutting system and clamp

 

Semi-automatic turntable wrapper with cutting system and clamp: it detects pallets' height while making an optimized wrapping compared to a manual wrapping. The load is introduced and positioned on the turntable. Then, the turntable begins to rotate at the selected speed depending on the wrapping cycle. The turntable will keep rotating during the whole cycle until its ending and then the film is cut and clamped for the next cycle.

Technical features

• EAR-FLAP^® profile.
• Production (as operator and load): up to 10 pallets/hour.
• PLC controlled, with display control panel.
• Hinged mast.
• Turning ring with soft start, indexed stop and variable speed.
• Pneumatic clamp to hold film before the wrapping cycle.
• Automatic film cutting arm.
• Electromagnetic film brake with anti-entanglement.
• Load height detection by photocell.
• Turntable dimensions: Ø1.650 mm and 10mm thick.
• 10 cycles of programmable automatic wrapping with graphics for operator assistance.
• Special mode for the application of protective corners.
• 4 wrapping programs: Single, Cross wrap, Cross-plus, Full.
• Wrapping cycles counter.
• Independently adjustable top & bottom reinforcement wraps.
• Transmission guide carriage reel holder and chain platform.
• Reinforcement wraps at any point in the cycle.
• Ergonomically designed control panel.
• Electric power: based on the country of destination.
• Installed power: 1 Kw.
• Air pressure: 6 bar.

Standard pallet features (others on demand)

• Type of wrapping: Vertical.
• Maximum height: Up to 2.400 mm (consult about other heights).
• Maximum dimensions pallet and load: 1.200 x 1.100 mm (consult about other dimensions).
• Maximum weight: 2.000 kg.

Coil specifications

• PE sheet.
• Width: 500mm.
• Thickness: Up to 50 microns.

Versions

• Stainless steel 430, 304.
• Explosion proof.
• Subzero temperatures.

Options

• Special heights: 2.800 mm, 3.000 mm.
• Special turntables: Ø 2.000 mm, Ø 2.400 mm, Ø 3.000 mm.
• Special weights: 3.000 Kg.

Accessories

1. Turntable accessing ramp.
2. Embedding frame.
3. Scale with display.
4. Direct film brake.
5. Mechanical film brake.
6. Electromagnetic film brake with anti-entanglement (std.).
7. Powered film pre-stretching with anti-entanglement (200%, 300%,400%).
8. Powered film pre-stretching with anti-entanglement with roping system.
9. Twin film reel holder.
10. Powered top platen: square or round base.
11. Special top holder for flat loads.
12. Load detection options: ultrasound.
13. Cycle start options: Remote control, pedal and button with stand.
14. Security beacon.
15. Security fencing.
16. Top sheet dispenser TDM1800.

“A la carte” machine

• For further specifications, please contact us.